The aim of the reconstruction is to increase the machine output by 25 %. From this reason, the wire table will be modified and, in particular, the press part will be completed where a new pick-up press will be installed. The existing JUMBO presses remain in the position of the second and the third presses. The total reconstruction is carried out in cooperation with the group of companies PAPCEL/ABK. A professional technological audit of the machine drying part will be performed in cooperation with the technologists of the ABK division.
Within the reconstruction of the stock preparation line, the PAPCEL Group will supply an entirely new pulping node with a high-capacity pulper LCV-50 (waste paper processing), equipped with a complete system of the paper stock washing and dewatering. The capacity of the pulping stage is constructed for 420 tpd. In addition, the part serving for the stock coarse separation will be modified.
This is a second successive supply realized within the installation of the high-capacity pulping node. The first installation of a higher series pulper, i.e. LCV-65, was carried out at the end of 2014 in Murom division (Nikol-Pack Uchaly, Russia), where the customer increased, thanks to the line modification, the total capacity to 600 tpd.